Production
CO.ME.GE. spa has a shop floor divided into three departments: laser cutting bending, punching of sheet metals and tubes, carpentry manufacturing.
Each phase is carry out with dedicated machines that allow us to settle short production time with reduced costs.
Notwithstanding compliance with customer’s specifications CO.ME.GE. spa established general tolerances for each type of processing; these tolerances are the m degree for laser cutting and punching, and the c degree for bending (UNI EN 22768/1).
| Tolerance class |
Upper/Lower limit |
| Degree |
Denomination |
over 0,5 to 3 |
over 3 to 6 |
over 6 to 30 |
over 30 to 120 |
over 120 to 400 |
over 400 to 1000 |
over 1000 to 2000 |
over 2000 to 4000 |
| f |
extra fine |
± 0,05 |
± 0,05 |
± 0,1 |
± 0,15 |
± 0,2 |
± 0,3 |
± 0,5 |
- |
| m |
fine |
± 0,1 |
± 0,1 |
± 0,2 |
± 0,3 |
± 0,5 |
± 0,8 |
± 1,2 |
± 2 |
| c |
coarse |
± 0,2 |
± 0,3 |
± 0,5 |
± 0,8 |
± 1,2 |
± 2 |
± 3 |
± 4 |
| v |
very coarse |
- |
±0,5 |
± 1 |
± 1,5 |
± 2,5 |
± 4 |
± 6 |
± 8 |
| Tolerance class |
Upper/Lower limit |
| Degree |
Denomination |
until 10 |
over 10 until 50 |
over 50 until 120 |
over 120 until 400 |
over 400 |
| f |
extra fine |
± 1° |
± 0°30' |
± 0°20' |
± 0°10' |
± 0°5' |
| m |
fine |
| c |
coarse |
± 1°30' |
± 1° |
± 0°30' |
± 0°15' |
± 0°10' |
| v |
very coarse |
± 3° |
± 2° |
± 1° |
± 0°30' |
± 0°20' |
